Stainless Steel Magnetic Drive Pump

Short Description:

Product Detail

Product Tags

Product description

The magnetic pump is a new product that uses the working principle of the magnetic coupling to apply to the centrifugal pump.
It has reasonable design, advanced technology, full sealing, no leakage, and corrosion resistance.
Its performance has reached the highest advanced level of similar foreign products.
The pressure that this product can withstand is 6 kg.

Performance introduction

It uses a static seal instead of a dynamic one, so as to keep the pump's wetted parts in a fully sealed state.
This design completely solves the problem of liquid leakage that other pump mechanical seals cannot avoid. Therefore, it is also called a leak-free pump.
The magnetic pump has compact structure, beautiful appearance, small footprint, low noise, reliable operation and convenient maintenance.
It can be widely used in chemical, pharmaceutical, petroleum, electroplating, food, scientific research institutions, national defense industries and other units to pump acids, alkalis, oils, rare and precious liquids, poisons, volatile liquids, as well as circulating water equipment and filters. Especially for the pumping of leaky, flammable and explosive liquids, it is more ideal to choose this pump.

Model Description

32	CQ-	15	P	B
Inlet diameter	Magnetic pump	Pump rated head/lift	Stainless steel	Flameproof motors/Explosion-proof motors

Performance parameter table

Model	Diameter		Flow	Head/Lift	Motor Power	Speed	Voltage
	Inlet(mm)	Outlet(mm)	(m³/H)	(m)	(Kw)	(r/min)	(V)
16CQ-8P	16	12	30/1.8	8	0.18	2900	380/220
20CQ-12P	20	12	50/3.0	12	0.37	2900	380/220
25CQ-15P	25	20	110/6.6	15	1.1	2900	380/220
32CQ-15P	32	25	110/6.6	15	1.1	2900	380/220
32CQ-25P	32	25	110/6.6	25	1.5	2900	380/220
40CQ-20P	40	32	180/10.8	20	2.2	2900	380
40CQ-25P	40	32	180/10.8	25	3	2900	380
40CQ-35P	40	32	180/10.8	35	4	2900	380
50CQ-25P	50	40	240/14.4	25	4	2900	380
50CQ-35P	50	40	240/14.4	35	4	2900	380
50CQ-50P	50	32	240/14.4	50	5.5	2900	380
65CQ-25P	65	50	450/27	25	5.5	2900	380
65CQ-35P	65	50	450/27	35	7.5	2900	380
80CQ-25P	80	65	850/51	25	7.5	2900	380
80CQ-35P	80	65	850/51	35	11	2900	380

Note: 0.37 KW and above can be equipped with explosion-proof motors, and the materials of the over-current parts are 304, 304 L, 316 and 316 L respectively.
The working pressure of the system is not more than 0.6 MPa, the viscosity is not more than 30*10 °㎡/s, and it does not contain iron and the liquid that contains hard solid particles.

Motor
Coupling frame
External rotor
Isolation sleeve
Shaft sleeve
Dynamic Ring
Internal rotor
Pump shaft
Sealing ring
Partition
Impeller
Impeller nut
Static ring
Pump body